工装定做时如何测量合适的尺寸_新闻资讯-济南亚美森服饰有限公司

新闻

联系方式

服务热线：0531-85980985　

联系人：宁经理
手机：13953116782
电话：15990999232
邮箱：499589624@qq.com
地址：济南市槐荫区清河北路11号（美里新居南门斜对面）亚德森工厂店

工装定做时如何测量合适的尺寸

来源：http://www.ymsfs.com 日期：2020-04-01 发布人：

　　工装定做顾名思义就是为了能定制出合体的工装，在定制工装前都会先测量各重要部位的数据，以此数据来定制工装。那么在量身定制的时候有哪些注意事项呢？测量时，为了保持服装定做尺寸的准确性，被测量者穿简单或较薄的衣服，抬头挺胸站直，双手自然下垂，测量围度时，皮尺应保持垂直，量体时要注意被测量者的体型特点，以便制作定制职业装时参考用。

　　As the name implies, tooling customization is to be able to customize the fit of the tooling, in order to customize the tooling in the tooling will be measured in the important parts of the data, the data to customize the tooling. What do you need to know when customizing? When measuring, in order to maintain the accuracy of custom-made clothing size, the measured wear simple or thin clothes, stand tall and straight, natural hands droop, measuring circumference, the tape measure should be kept vertical, when measuring the body should pay attention to the shape of the measured characteristics, in order to make custom professional dress for reference.

　　1.总长：代表服装“号”,由头部顶端垂直测量脚跟。

　　1. Total length: represents the "size" of the garment, measured vertically from the top of the head to the heel.

　　2.衣长：由前身左侧脖根位置，软尺通过胸部丰满处弧形测量长度，一般要看工装款式特点来定。

　　2. Length: from the front left root of the neck position, soft ruler through the chest fullness in the arc length measurement, generally depends on the characteristics of the style of the tooling to determine.

　　3.袖长：由左肩骨外端顶点量手的虎口位置，不宜过短也不宜过长。

　　3. Sleeve length: measure from the tip of the left shoulder bone to the mouth of the hand, neither too short nor too long.

　　4.肩宽：由左肩骨外端顶点量右肩骨外端顶点，软尺在后背贴紧后脖根略成弧形。

　　4. Shoulder width: measure from the apex of the outer end of the left shoulder bone to the apex of the outer end of the right shoulder bone.

　　5.胸围：将皮尺放在胸部丰满位置顶点水平环绕一周。

　　5. Bust: place the tape measure at the top of the full bust position and wrap it around.

　　6.腰围：将皮尺放在腰部细位置水平环绕一周。

　　6. Waist circumference: place the tape measure around the waist at a thin level.

　　7.腰节：一般体型可按总体高度比例算出。遇到体型时，就需要测量这前后腰节尺寸，即将皮尺放在腰部细处水平环绕一周，自颈围前后中心点量到前后腰围皮尺的中间尺寸，即为前后腰节的尺寸。

　　7. Waist section: general body type can be calculated in proportion to the overall height. When it comes to body type, it is necessary to measure the size of the front and rear waist joints. Put the tape measure on the waist and circle it horizontally. Measure the middle size of the tape measure from the center point of the neck circumference to the middle size of the tape measure from the front and rear waist circumference, which is the size of the front and rear waist joints.

　　8.臀围：将皮尺放在臀部丰满位置顶点水平环绕一周。

　　8. Hip circumference: place the tape measure around the top of the full butt position.

　　以上便是小编总结的关于工装定做时如何测量合适的尺寸的方法，希望能够帮到您。但是事情交给的人，才能让事情变的更。如果您需要进行工装定做，不妨拨打我们济南亚德森服饰有限公司网站的热线电话进行咨询http://www.ymsfs.com。

　　Above is the small make up summary about how to measure the appropriate size of the tooling custom method, I hope to help you. But professional things to professional people, to make things more perfect. If you need to have the tooling made to order, you might as well call our jinan adesen clothing co., LTD. Website hotline for consultation http://www.ymsfs.com.

上一条：中西餐厅的厨师服各有什么优点? | 下一条：如何将职业装搭配出时尚的感觉

搜索

工装定做时如何测量合适的尺寸

来源：http://www.ymsfs.com 日期：2020-04-01 发布人：

资讯MORE+