厂家讲解服装定制细节及定制流程工艺_新闻资讯-济南亚美森服饰有限公司

新闻

联系方式

服务热线：0531-85980985　

联系人：宁经理
手机：13953116782
电话：15990999232
邮箱：499589624@qq.com
地址：济南市槐荫区清河北路11号（美里新居南门斜对面）亚德森工厂店

厂家讲解服装定制细节及定制流程工艺

来源：http://www.ymsfs.com 日期：2022-06-22 发布人：

厂家讲解服装定制细节

The manufacturer explained the details of garment customization

线头干净，一般的工作服。他们有尾部，有专门的人剪线头，一般的便宜的工作服一般没有。还有一件工作服如果要求质量好的话，一般线头不超过1CM。

The thread ends are clean. It is a common brand of work clothes. They have tails and special people to cut thread ends. Generally, they don't have cheap work clothes. There is also a overalls. If it is required to be of good quality, the thread end generally does not exceed 1cm.

济南服装厂建议您，看走线，线路，主要是看工作服的车线是否直?是否匀称?针距是稀还是密?一般针距密的比较好点，在开始的时候有没有打“倒回针”，拼接处有没对齐。倒回针：在一件工作服开始做一般要来回走几针，这样工作服就不容易开口，还有一个部位结束的时候也要打倒回针。

Jinan garment factory suggests you look at the routing and route, mainly to see whether the line of work clothes is straight? Is it symmetrical? Is the needle pitch thin or dense? Generally, the stitch spacing is better, whether the "reverse stitch" is applied at the beginning, and whether the splicing is aligned. Rewinding needle: generally, it takes several stitches back and forth when a work suit is started, so it is not easy for the work suit to open. There is also a part that needs to be rewinding when it is finished.

都是防止他一拉就暴口一般梭织的比较明显，比如一条梭织的裙子，你可以看他接口处有没多走几针，看侧缝也可以看工作服都看一些比较偏的地方，一般人不注意查看到的地方，“领子““袖子、袖口腋下等”。

It's all to prevent his mouth from bursting when he pulls it. For example, for a woven skirt, you can see whether there are more stitches at the interface. You can also see some biased places in the work clothes when you look at the side seams. Where ordinary people don't pay attention to, "collar", "sleeves, armpits, etc.".

这个拉线的松和紧是在不同的部位有不同的要求，比如是肩部，人体经常活动的部位，松一点比较好，在工作服的下面，就紧一点比较好，一般一件工作服均匀、领口、领口针脚、腋下车线、接口是否有倒回针。

The looseness and tightness of the stay wire have different requirements in different parts, such as the shoulder, the part where the human body often moves. It is better to loosen it a little, and it is better to tighten it under the overalls. Generally, a overalls is uniform, and whether there are reverse stitches at the neckline, neckline stitches, underarm stitches and joints.

这里要注意了，如果是烫钻的工作服，看看钻是否容易掉，如果是高温压钻的话，就不会掉!烫钻是否易掉。不过一般工作服是不会用烫钻的。

It should be noted here that if it is a hot drill uniform, check whether the drill is easy to fall off. If it is a high-temperature pressure drill, it will not fall off! Whether the hot drill is easy to fall off. But ordinary overalls don't use hot drills.

讲规格，也就是大家所了解的，工作服的尺码一定要正，不要标的是M，实际是L，出现乱码或者错码的现象。

As we all know, the size of work clothes must be correct, not marked with m, but actually L. there is confusion or wrong size.

看一件工作服，平铺下去，看一下会不会有色差，时准除外，还有就是工作服上下是否均匀，然后栓查有没有小洞等等。

When looking at a work suit, first lay it flat to see if there is any color difference, except for timing, and whether the work suit is even up and down, and then check whether there are small holes, etc.
济南服装厂

厂家讲解服装定制流程工艺

The manufacturer explains the garment customization process

刺绣工艺也是一种很常见的工作服生产工艺，对于很多公司或企业工作服只需要打印一个非常简单的企业标识，所以虽然刺绣工艺与其他工艺相比，它更贵，但从更具成本效益更长的时间，刺绣过程更有利，并且图案不会因反复洗涤而脱落。

Embroidery process is also a very common production process of work clothes. For many companies or enterprises, work clothes only need to print a very simple enterprise logo. Therefore, although embroidery process is more expensive than other processes, it is more cost-effective and takes longer, the embroidery process is more advantageous, and the pattern will not fall off due to repeated washing.

水浆印刷和胶水印刷都是各种丝网印刷，这种技术是大多数定制商的选择。工艺，由于定制的制服，这种工艺的成本是负担得起的，印刷部分更舒适和透气。市场上大多数印花工作服使用这种技术。

Water slurry printing and glue printing are all kinds of screen printing. This technology is the choice of most custom makers. Process, due to custom uniforms, the cost of this process is affordable, and the printed part is more comfortable and breathable. Most printed work clothes on the market use this technology.

济南服装厂提醒您，传热工艺也是一种非常流行的印刷工艺，随着技术的发展，传热工艺所产生的工作服的舒适性也可以与丝网印刷工艺相比，而且效果更复杂或更有图案标识，可以大大缩短打印过程，缩短打印周期。考虑选择这个过程。

Jinan garment factory reminds you that the heat transfer process is also a very popular printing process. With the development of technology, the comfort of work clothes produced by the heat transfer process can also be compared with the screen printing process, and the effect is more complex or has more pattern marks, which can greatly shorten the printing process and shorten the printing cycle. Consider choosing this process.

以上就是今天为大家分享的关于问题的相关内容，希望对大家能有所帮助，想要了解更多内容可以电话联系我们或者关注我们的网站http://www.ymsfs.com。

The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.ymsfs.com 。

上一条：不同身材与身份的人进行工装定制要慎重 | 下一条：定做职业装的好坏挑选看方法

搜索

厂家讲解服装定制细节及定制流程工艺

来源：http://www.ymsfs.com 日期：2022-06-22 发布人：

资讯MORE+