联系方式
服务热线:0531-85980985
联系人: 宁经理 手机:13953116782 电话:15990999232 邮箱:499589624@qq.com 地址:济南清河北路11号
工作服定做中拉链的检测很重要!
来源:http://www.ymsfs.com 日期:2023-01-27 发布人:
拉链是服装中关键的辅材,它的各个方面的优劣都是会可以直接影响到服装制成品的品质,而对山东工作服定做而言,检测拉链是尤为重要的一歩。
Zipper is the key auxiliary material in clothing, and its advantages and disadvantages in all aspects can directly affect the quality of clothing products. For customized Shandong work clothes, zipper detection is a particularly important step.
平拉强力:是基本的强力指标值,用以检测工作服拉链齿在互锁状况下,能够抵御横向作用力的大小,进而实现与具体应用状况类似。
Flat pull strength: It is the basic strength index value used to detect the size of the zipper teeth of the work clothes that can resist the horizontal force under the interlocking condition, and then achieve the same as the specific application.
上止强力:拉链链齿互锁,并将拉链头拉到上端部位的止口部位,牵拉拉链头这时能够检测济南工作服定做拉链上止强力,这也是模拟拉链在握持状况下出现的状况,拉链头越过上止拉脱或将上止从带筋上移动时,能够抵御外力的作用。
Top stop strength: the zipper chain teeth are interlocked, and the zipper head is pulled to the top stop of the upper part. Pulling the chain head can detect the top stop strength of the customized zipper for Jinan work clothes at this time, which is also the condition of the zipper in the grip condition. When the zipper head is pulled over the top stop or moves the top stop from the band, it can resist the effect of external forces.
下止强力:将拉链头拉到下部部位的止口,拉齿被分成左右两部门,牵拉两边的链齿能够检测下止被毁坏时所需要的力,以及检测拉链头内部构件的抵御能力。
Lower stop force: pull the zipper head to the lower part of the stop, and the pull teeth are divided into two parts, the chain teeth on both sides can detect the force required when the lower stop is damaged, and the resistance of the internal components of the zipper head.
开尾平拉强力:济南工作服定做检测开尾拉链插管同样插座抵御外力毁坏状况,在夹具上下分别固定开尾的左右边,拉链在闭合状况下开启念头器。
Open-end flat pull strength: Jinan work clothes are customized to detect the open-end zipper intubation, the same socket is resistant to external force damage, and the left and right sides of the open-end are fixed on the upper and lower parts of the clamp, and the zipper is opened when closed.
拉土拉瓣结合强力:以垂直在拉瓣的方向增加拉链头作用力,直到拉瓣与拉体分离,这时要纪录标值。
The binding strength of the pull valve: increase the force of the zipper head in the direction of the pull valve vertically until the pull valve is separated from the pull body, and then record the mark value.
工作服定做中拉链的检测事项就讲解到这里了,你有怎样的想法或者需求,可以随时来我们网站http://www.ymsfs.com留言咨询!
This is the inspection of zippers in the customization of work clothes. If you have any ideas or needs, please come to our website at any time http://www.ymsfs.com Message consultation!
上一条:如何选择适合男士的西装定制厂家 | 下一条:对于秋冬季工作服定做的设计要求和注意事项
资讯MORE+
- 高端职业装的定制要从哪些方面调整? 2024-04-18
- 加油站员工为什么要穿防静电的工作服呢? 2024-04-08
- 怎样去选择一件好的工作服? 2024-04-07
- 房地产行业西服定制有哪几种? 2024-03-29
- 济南工作服:在选择和使用劳保工作服时要注意什么? 2024-03-25
- 关于短袖衬衫一些常见搭配 2024-03-28
- 济南工作服:水务系统工作服的特点 2024-03-22
- 济南职业装:订做服装颜色搭配需要注意什么? 2024-03-20
- 冲锋衣定制时的颜色选择 2024-03-17
- 劳保服装的制作的面料选择! 2024-03-16
- 工作服定做及要考虑实用性! 2024-03-13
- 如何区分济南定制工作服的质量? 2024-03-07
- 竹纤维面料的材质是什么? 2024-03-06
- 企业工作服定制的要素有哪些? 2024-02-28
- 穿戴制服可以增强员工对企业的归属感 2024-02-27
- 女生职业装的搭配技巧 2024-02-22
- 企业工装定制常选用的面料 2024-02-21
- 定做工作服:制版过程中如何分类? 2024-02-13
- 冬季防静电工作服有哪些类别? 2024-02-13
- 办公室职业套装定制有哪些? 2024-02-08