一、工作服定制面料

1、 Customized fabric for work clothes

多数情况下，本着既经济实惠，又美观体面的原则，应当考虑棉毛、纯毛、毛麻、纯棉、棉麻毛涤等面料。纯毛、纯棉、纯麻等面料，不仅质地，而且吸湿、透气、贴身、舒适、外形美观、穿在身上显得较为高档。经济条件如能允许，应对此予以考虑。棉毛、棉麻、毛麻、毛涤等等，皆属于高档混纺面料。有些时候，为了从事某些特殊工作或是适应某些特殊环境的需要，用以制作工作服的面料，通常还会被要求具备某些比较特殊的功能。

In most cases, based on the principle of being both economical and aesthetically pleasing, priority should be given to fabrics such as cotton and wool, pure wool, wool and linen, pure cotton, cotton, linen, wool and polyester. Pure wool, pure cotton, pure linen and other fabrics not only have a pure natural texture, but also have moisture absorption, breathability, close fitting, comfort, beautiful appearance, and appear more upscale when worn on the body. If economic conditions permit, priority should be given to this. Cotton wool, cotton linen, wool linen, wool polyester, and so on are all high-end blended fabrics. Sometimes, in order to engage in certain special jobs or adapt to certain special environments, fabrics used to make work clothes are usually required to have certain special functions.

二、工作服定制色彩要求

2、 Customized color requirements for work clothes

工作服的色彩宜少而不宜多。工作服定做具体来说，选择工作服的色彩时应当选择本单位的标志性色彩。在用来塑造单位形象的“形象识别系统”之中，标志性色彩占据着重要的位置。

The colors of work clothes should be few but not many. Specifically, when choosing the color of work uniforms, priority should be given to the iconic colors of the unit. In the "image recognition system" used to shape the image of a unit, iconic colors occupy an important position.

三、工作服定制设计图案

3、 Customized design patterns for workwear

工作服定做设计的图案必须走简约路线，把企业logo或者标志用意蕴含在简明的图案中。花哨的图案，会让不了解你们企业的人不知所云;没有意蕴的图案，无法引起企业客户的兴趣。

The pattern of customized work clothes design must follow a minimalist approach, incorporating the meaning of the company logo or logo into a concise pattern. Fancy patterns will leave those who are not familiar with your company at a loss; Patterns without meaning cannot arouse the interest of corporate customers.

四、工作服定制色差

4、 Customized color difference for workwear

根据有关标准对色差的规定，服装的上衣领、袋面料、裤侧缝是主要部位，色差高于四级，其他表面部位四级。服装产品的色差检验，其工具是借用“染色牢度褪色样卡”。该样卡是原纺织工业部制订的标准之一。样卡用五对灰色标样组成，分为五个等级。五级代表褪色牢度好，色差等于零，四级一级代表褪色相对递增的程度，一级表示严重。

According to relevant standards on color difference, the upper collar, bag fabric, and pants side seams of clothing are the main parts, with a color difference higher than four levels, and other surface parts are four levels. The tool for color difference inspection of clothing products is to borrow the "Color Fastness Fading Sample Card". This sample card is one of the standards formulated by the former Ministry of Textile Industry. The sample card is composed of five pairs of gray standard samples, divided into five levels. Five levels represent good fading fastness, with a color difference of zero. Levels four to one represent the degree of relative increase in fading, while level one indicates severe fading.

五、工作服定制疵点

5、 Customized defects in work clothes

标准规定，每个独立部位只允许有疵点一处。独立部位是对衣片所划分的区域，按衣片的主次部位，分1、2、3、4四个区域。每个部位就是衣片上的一个区域。

According to the standard, only one defect is allowed in each independent part. The independent part is the area divided by the clothing piece, divided into four areas: 1, 2, 3, and 4 according to the primary and secondary parts of the clothing piece. Each part is an area on the garment piece.