一款定制工装需要哪些检验标准

来源：http://www.ymsfs.com 日期：2022-09-05 发布人：meidesen

企业在定制工装裤交货后是要检查验收，要检查产品的各个方面是否符合自己的要求，这种检查还是很有必要的。那我们要从哪里开始测试呢?济南工装定做人员为您解答。

Enterprises should check and accept customized overalls after delivery, and check whether all aspects of the products meet their own requirements. This kind of inspection is still necessary. Where should we start the test? Jinan tooling customization personnel will answer for you.

1.面料的选择:同一款式的服装，面料的好坏决定了这件连衣裙的档次。所以布料是衣服重要的部分。优质面料制成的服装在服用寿命和服用功能方面远优于低档面料。

1. Selection of fabric: for the same style of clothing, the quality of the fabric determines the grade of this dress. So cloth is an important part of clothes. Clothes made of high-quality fabrics are far superior to low-grade fabrics in terms of service life and function.

2.工作服的尺寸，也是工作服检查的重要技术标准，大小要合体，穿着舒适，适合自己岗位作业人员需求，所以我们宽松适度发展尤为具有重要。

2. The size of work clothes is also an important technical standard for the inspection of work clothes. The size should be fit, comfortable to wear, and suitable for the needs of operators at their own posts. Therefore, it is particularly important for us to develop loose and moderate.

3.板型对称：验收定做工作服，需要通过仔细地看一下工作服的板型是不是能够左右结构对称，有的员工工作服会出现问题左右信息不对称、裁剪不整齐等情况。有扣子或拉链的工作服扣子是否具有对称，拉简是否存在可以拉上等。

3. Plate type symmetry: when accepting customized work clothes, you need to carefully check whether the plate type of work clothes can be symmetrical in left and right structures. Some employees' work clothes may have problems such as asymmetric left and right information and uneven cutting. Whether the buttons of work clothes with buttons or zippers are symmetrical, and whether the zipper can be pulled up.

4.做工：主要是看衣服的车线是否直?是否具有匀称?针距是稀还是密?一般针距密的比较自己好点，车线是否可以整齐。这个进行拉线的松和紧是在不同的部位有不同的要求。

4. Workmanship: mainly depends on whether the clothes are straight? Is it symmetrical? Is the needle pitch thin or dense? Generally, it's better to have a close stitch pitch. Can the stitches be neat. The loosening and tightening of the stay wire have different requirements in different parts.
济南工装定做

5.整体发展清洁：看一下定做工作服进行表面工作是否可以存在着不同染色、褪色、脏污等现象。有些工作服可能会导致染上油渍或一些问题不容易清洗的污渍，如果没有自己的话，就证明这家工作服厂家定做的工作服还是一个比较好的。

5. Overall development and cleaning: look at whether there can be different dyeing, fading, dirt and other phenomena when customized work clothes are used for surface work. Some work clothes may be stained with oil stains or stains that are difficult to clean. If you don't have your own work clothes, it proves that the work clothes customized by this work clothes manufacturer are still better.

6.包装:标准包装也是一种验收，需要注意的一个问题，主要看我们的制服是否是平铺的，是否有小孔等，或者是否有一个漏在包装上，影响制服的内部。

6. Packaging: standard packaging is also a kind of acceptance. A problem that needs to be paid attention to mainly depends on whether our uniforms are tiled, whether there are holes, etc., or whether one of them is leaked on the packaging, which affects the interior of the uniforms.

7.熨烫：工作服的外观应平整，熨烫时在工作服上放衬垫，保证每处工作服熨烫均匀，温度应控制在180℃~200℃之间。

7. Ironing: the appearance of the work clothes should be flat. When ironing, put a cushion on the work clothes to ensure that each work clothes is ironed evenly. The temperature should be controlled between 180 ° C and 200 ° C.

一款定制工装需要哪些检验标准？在此从七个方面来讲解了问题，如果您对此有什么疑惑就来我们网站http://www.ymsfs.com咨询了解吧！

What inspection standards are required for a customized tooling? Here we explain the problem from seven aspects. If you have any doubts about this, please come to our website http://www.ymsfs.com Consult and understand!

上一条：职业装定制在服务层面容易忽略的问题 | 下一条：如何网上选择合适的工作服定制厂家

搜索

一款定制工装需要哪些检验标准

来源：http://www.ymsfs.com 日期：2022-09-05 发布人：meidesen

推荐资讯MORE+