新闻
联系方式
服务热线:0531-85980985
联系人: 宁经理 手机:13953116782 电话:15990999232 邮箱:499589624@qq.com 地址:济南市槐荫区清河北路11号(美里新居南门斜对面)亚德森工厂店
哪种布料适合工作服?
来源:http://www.ymsfs.com 日期:2019-05-09 发布人:
工作服采购负责人要根据工作服使用者的工作服环境,是否需要防酸防碱、防辐射?是否需要抗油拒水?是否需要防风防寒?是否需要防火阻燃?等等。如果需要的话,您工作服面料一定要选择具有相对应的特种面料。这是必须要考虑的。这是为了工人的和工作效率考虑! 其次:根据季节和使用环境来决定面料的厚度,克重!根据喜好选择纹路。
First of all, the person in charge of purchasing work clothes should be based on the working clothes environment of the users of work clothes. Does it need to prevent acid, alkali and radiation? Do you need oil and water resistance? Do you need wind and cold protection? Do you need fire retardant? Wait. If necessary, you must choose a special fabric with corresponding working clothes. This must be considered. This is for the safety and efficiency of workers! Secondly: according to the season and the use of the environment to determine the thickness of the fabric, weight! Choose patterns according to your preferences.
做工作服适合用什么布料
What material is suitable for working clothes?
工作服常用面料介绍:
Introduction of common fabrics for work clothes:
1、全棉珠帆:
1. Cotton Pearl Sail:
面料特点:10358 布身滑爽,质地细密,颗粒饱满,纹路清晰,轻磨毛处理后光泽柔和,手感舒适。尺寸稳定,耐磨耐洗。不产生静电,对皮肤亲和力佳。成分: 100%c组织:1/1平纹组织 半线织物。工艺处理:丝光磨毛,防缩全工艺士林或活性染色。
Fabric characteristics: 10358 cloth body smooth, fine texture, full particles, clear lines, soft gloss after light abrasion treatment, feel comfortable. Size stability, wear resistance and wash resistance. No static electricity, good affinity for skin. Ingredient: 100% C structure: 1/1 plain weave half-line fabric. Technological treatment: mercerizing and polishing, shrink-proof technics Shilin or active environmental protection dyeing.
重量:340-350k/m幅宽:145-150cm
Weight: 340-350k/m width: 145-150cm
2、全棉纱卡:
2. Cotton yarn card:
面料特点:10856 布面斜路粗壮突出,布身坚牢厚实,不易起毛,经丝光后布面富有光泽,不易褪色,尺寸稳定,耐洗耐磨,不产生静电。
Fabric characteristics: 10856 fabric ramp thick and prominent, solid body, not easy to hair, after mercerizing, the fabric is lustrous, not easy to fade, size stability, wash resistance, wear resistance, no static electricity.
成分:100/c组织: 3/1卡其组织 工艺处理:丝光,烧毛,防缩全工艺,士林或活性染色。 重量:460-470g/m 幅宽:148-150cm3、全棉细斜:
Ingredients: 100/c Tissue: 3/1 Khaki Tissue Processing: Mercerizing, Sintering, Shrinkproof Complete Process, Shilin or Active Environmental Protection Dyeing. Weight: 460-470g/m width: 148-150cm3, cotton tilt:
面料特点:13070 布纹清晰细腻,布身细洁柔软布面棉结杂质少,质地较轻薄不易褪色,抗起球,吸湿透气尺寸稳定,不产生静电。
Fabric characteristics: 13070 fabric with clear and delicate pattern, fine and soft fabric with less neps and impurities, lighter texture, non-fading, anti-pilling, moisture absorption and air permeability size stability, no static electricity.


成分:100/c 组织:2/1斜纹组织 工艺处理:丝光磨毛,防缩全工艺士林或活性染色。重量:250-260k/m 幅宽:148-150cm4、cvc纱卡:
Ingredients: 100/c Tissue: 2/1 Twisted Tissue Processing: Mercerizing and Grounding, Shrinkage-proof Processing or Active Environmental Protection Dyeing. Weight: 250-260k/m width: 148-150cm4, CVC yarn card:
面料特点:采用涤棉倒比例混纺生产,大大提高了面料的断裂强度,耐磨抗皱性也强于纯棉织物。纹路清晰,经丝光处理后布面富有光泽,尺寸稳定,不易褪色。
Fabric characteristics: polyester-cotton inverted proportion blending production, greatly improved the breaking strength of the fabric, wear resistance and wrinkle resistance is stronger than pure cotton fabric. The texture is clear, after mercerizing, the cloth surface is glossy, the size is stable, and the color is not easy to fade.
成分:涤纶 40-45/% 棉 60-55/%组织: 1/3卡其组织 工艺处理:丝光,烧毛,防缩全工艺,士林或活性染色。重量:370-380k/m 幅度:148-150cm。
Ingredients: Polyester 40-45/% Cotton 60-55/% Tissue: 1/3 Khaki Tissue Processing: Mercerizing, Sintering, Shrinkage-proof Complete Process, Shilin or Active Environmental Protection Dyeing. Weight: 370-380k/m range: 148-150cm.
5、卡蒙呢:
5. What about Carmon?
面料特点:既有聚酯纤维的挺括,又不失黏胶纤维的柔顺,经高温处理后,布纹紧密华丽,回弹性好易机洗快干,抗皱性佳。
Fabric characteristics: both polyester fiber straightening, but also without losing the flexibility of viscose fiber, after high temperature treatment, cloth pattern is compact and gorgeous, good resilience, easy machine wash and quick drying, wrinkle resistance is good.
成分:聚酯维80/%;粘胶20/% 组织:2/1单面斜纹工艺处理:活性二浴法染色。 重量:270k/m 幅度:148-150cm6、迪斯平:
Ingredients: polyester 80/%, viscose 20/% structure: 2/1 single-sided twill process treatment: active two-bath environmental protection dyeing. Weight: 270 k/m range: 148-150 cm 6, Dispense:
面料特点:面料滑而不糙,手感丰满厚实外观挺括,吸湿性好,尺寸稳定,耐磨易洗快干。
Fabric characteristics: the fabric is slippery but not rough, the feel is full and thick, the appearance is straightforward, moisture absorption is good, the size is stable, wear-resistant, easy to wash and dry quickly.
成分:涤80/% 粘20/%组织: 1/1平纹组织 工艺处理:活性染色重量:300k/m 幅度:148-150cmIngredients: Polyester 80/% viscose 20/% tissue: 1/1 plain weave processing: Active environmental protection dyeing weight: 300k/m range: 148-150cm
上一条:便宜的工作服有缺点吗 | 下一条:公司工作服订做必须依据办公环境来挑选样式
资讯MORE+
- 济南服装厂制作衣服有那些流程? 2025-06-14
- 济南工作服:打造专属形象,提升团队凝聚力 2025-06-13
- 济南服装厂生产车间标准体系解析 2025-06-12
- 济南服装厂面对不同的衣服是怎么控制好每个步骤的? 2025-06-11
- 济南特殊工作服防燃,防静电怎么做到的? 2025-06-10
- 济南工作服马甲制作全流程解析:从设计到成衣的技术 2025-06-09
- 济南工作服厂服装生产全流程解析:从面料到成衣的质量把控 2025-06-07
- 济南职业装:齐鲁风韵与现代职场的融合演绎 2025-06-06
- 济南工作服生产中的版型与数量精准管控全流程解析 2025-06-05
- 工作服选购指南:如何挑到既省钱又耐穿的好衣服 2025-06-04
- 带你了解济南服装厂家生产过程环节 2025-06-03
- 讲解酒店制服工艺流程有什么要点 2025-05-27
- 在济南定制工作服时是不是遇到这些问题,看看对应的问题怎么解决 2025-05-26
- 工作服性价比密码:花小钱穿出「耐造 + 实用 + 好看」,打工人想要这样的! 2025-05-22
- 服装定制校服需关注六大核心维度 2025-05-20
- 定制工作服马甲时,怎么做到又能提升企业形象,又能提升员工体验? 2025-05-19
- 通信工程师工装工具挂载有哪些优化? 2025-05-16
- 济南工作服:短袖的制作方法 2025-05-14
- 带你了解济南服装厂裁剪的工序和裁制环节 2025-05-12
- 济南工装定做流程详细的讲解 2025-05-09