当我们采购防静电服的时候，由于大多数人都是外行，只能凭供应商业务员随便说，于面料材质到底是不是防静电的，我们就无从得知。下面就让我们说说，怎么检测判断是不是防静电材质?

　　When we purchase anti-static clothing, as most people are inexperienced, we can only rely on the supplier's salesperson to casually say. As for whether the fabric material is anti-static or not, we have no way of knowing. Now let's talk about how to detect and determine whether it is an anti-static material?

　　怎么知道面料是不是防静电的

　　How do you know if the fabric is anti-static

　　防静电面料的判断方法

　　Methods for judging anti-static fabrics

　　经纬密度测量：用经纬密度镜计测量织物的经纬密度，并进行比较。

　　Measurement of latitude and longitude density: Use a latitude and longitude density mirror to measure the latitude and longitude density of the fabric and compare them.

　　电阻测量：用表面电阻测试仪测量织物的经纬电阻，并进行比较。

　　Resistance measurement: Use a surface resistance tester to measure the warp and weft resistance of the fabric and compare them.

　　比较的原则是：选择电阻较小的;如果电阻相同，选择稳定的电阻值。

　　The principle of comparison is to choose the one with lower resistance; If the resistance is the same, choose a stable resistance value.

　　注意面料是否添加抗静电整理剂(适用于经纱方向添加导电纤维的导电稠，俗称条纹布)。方法是用表面电阻测试仪测量经纱方向和纬纱方向的电阻。如果相同，说明添加了抗静电整理剂，那么测得的电阻不代表真实水平。

　　Pay attention to whether the fabric has added anti-static finishing agents (suitable for conductive thick fabrics with conductive fibers added in the warp direction, commonly known as striped fabrics). The method is to use a surface resistance tester to measure the resistance in the warp and weft directions. If they are the same, it means that anti-static finishing agent has been added, and the measured resistance does not represent the true level.

　　看微观结构：用高倍放大镜看面料质量，比较纤维之间的间隙大小(与滤尘率有关)，看纤维表面是否有附着物(与粉尘散发量有关)，看纤维排列是否整齐，紧密度是否一致(如果紧密度不一致，有些松散的纤维在洗涤时容易磨损，后期磨损会散发粉尘)。

　　Observing microstructure: Use a high-power magnifying glass to examine the quality of the fabric, compare the gap size between fibers (related to dust filtration rate), check for any attachments on the fiber surface (related to dust emission), check for neat fiber arrangement and consistent tightness (if the tightness is not consistent, some loose fibers are prone to wear during washing, and later wear will emit dust).

　　检查导电纤维：导电纤维是防静电超净面料的关键原料。检查导电纤维就是看是否按照规格添加导电纤维，添加什么样的导电纤维。

　　Check conductive fibers: Conductive fibers are a key raw material for anti-static and ultra clean fabrics. Checking conductive fibers is to see if conductive fibers are added according to specifications and what kind of conductive fibers are added.

　　检验方法：用剪刀小心地沿着黑色导电纤维的边缘切割织物，分离黑色导电纤维，用放大镜观察是否有一根或几根较粗的纤维，用表面电阻测试仪测量分离后的导电纤维的电阻。连续去除几片后，基本可以判断织物中的每一根黑丝是否含有导电纤维。(导电丝由碳有机导电纤维制成，黑色或灰色，一般在20D左右，1f-6f之间。为了满足织造中的强度要求，需要并一根普通的黑色或白色化纤纤维。

　　Inspection method: Carefully cut the fabric along the edges of the black conductive fibers with scissors, separate the black conductive fibers, observe with a magnifying glass whether there are one or several thicker fibers, and measure the resistance of the separated conductive fibers with a surface resistance tester. After removing several pieces continuously, it can be basically determined whether each black filament in the fabric contains conductive fibers. The conductive wire is made of carbon organic conductive fibers, black or gray, usually around 20D and between 1f-6f. To meet the strength requirements in weaving, a regular black or white synthetic fiber is needed.

　　对比面料工艺参数：要求供应商提供面料的基本参数，如纱线细度(多少D，多少F)、经纬密度、面料组织、成品宽度、染色收缩率、使用何种导电纤维等，然后进行对比，看是否相符。

　　Comparing fabric process parameters: Suppliers are required to provide basic parameters of the fabric, such as yarn fineness (how much D, how much F), warp and weft density, fabric structure, finished product width, dyeing shrinkage rate, and what type of conductive fiber is used, and then compare to see if they match.

　　以上就是关于，如何判断面料是不是防静电的相关内容，希望对您有所帮助。我们长期为各类企业，供应高品质防静电服，如果您近有这方面的需要，欢迎与我们取得联系。

　　The above is about how to determine whether a fabric is anti-static. I hope it is helpful to you. We have been supplying high-quality anti-static clothing to various enterprises for a long time. If you have any needs in this area recently, please feel free to contact us.