焊工工作服的标准与要求，在GB9448-88《焊接与切割》中4.2.2条有如下要求：

　　The standards and requirements for welding uniforms are as follows in Article 4.2.2 of GB9448-88 "Welding and Cutting Safety":

　　4.2.2.1 焊工工作服应根据焊接与工作的特点选用。

　　4.2.2.1 Welder work clothes should be selected according to the characteristics of welding and work.

　　4.2.2.2 棉帆布工作服广泛用于一般焊接、切割工作，工作服颜色为白色。选用面上有一种阻燃布的白色工作服。

　　4.2.2.2 Cotton canvas workwear is widely used for general welding and cutting work, and the color of the workwear is white. It is recommended to choose white work clothes with a flame-retardant fabric on the surface.

　　4.2.2.3 气体保护焊在紫外线作用下，在产生臭氧等气体时，应选用粗毛呢或皮革等面料制成的工作服，以防焊工在操作中被烫伤或体温增高。

　　4.2.2.3 When gas shielded welding generates ozone and other gases under the action of ultraviolet radiation, work clothes made of coarse woolen or leather fabrics should be selected to prevent the welder from being burned or experiencing an increase in body temperature during operation.

　　4.2.2.4 从事全位置焊接的焊工应配制皮鞋工作服。

　　4.2.2.4 Welders engaged in all position welding should be equipped with leather shoe work clothes.

　　4.2.2.5 在仰焊、切割时，为防止火星、溶渣从高处溅落到头部和肩上，焊工应在颈部围毛巾、穿着用防燃材料制成的护肩、长袖套、围裙和鞋盖等。

　　During overhead welding and cutting, in order to prevent sparks and slag from splashing onto the head and shoulders from high places, welders should wrap a towel around their neck, wear shoulder protection made of flame-retardant materials, long sleeved covers, aprons, and shoe covers.

　　4.2.2.6 焊工穿用的工作服不应潮湿、工作服的口袋应有袋盖，上身应遮住腰部，裤长应罩住鞋面。工作服上不应有破损、孔洞和缝隙，不允许沾有油脂。

　　4.2.2.6 The work clothes worn by welders should not be damp, and the pockets of the work clothes should have bag covers. The upper body should cover the waist, and the length of the pants should cover the shoe upper. There should be no damage, holes, or gaps on the work clothes, and no oil or grease is allowed to adhere to them.

　　4.2.2.7 焊接与切割作业的工作服，不能用一般合成纤维物做成。

　　Work clothes for welding and cutting operations cannot be made of general synthetic fiber materials.

　　扩展资料：

　　Additional Information:

　　电焊工电焊作业的防护措施又有哪些方面：

　　What are the safety protection measures for welders during welding operations

　　1、要说的就是焊工必须穿戴好电焊工作服，绝缘的鞋子及其绝缘的手套;

　　1. The first thing to say is that welders must wear welding work clothes, insulated shoes, and insulated gloves;

　　2、焊接时，强大的电弧光形成了大量的紫外线，红外线，对人眼有刺激的作用，因而，焊接时应当拿好电焊防护罩，防护罩带有滤光镜片，防止与电弧光的直视;

　　2. During welding, the powerful arc light generates a large amount of ultraviolet and infrared radiation, which can be irritating to the human eye. Therefore, it is necessary to hold a welding protective cover with a filter lens to prevent direct contact with the arc light;

　　3、做好防触电措施，及时检测电焊设备和电焊线;

　　3. Take measures to prevent electric shock and promptly inspect welding equipment and wires;

　　4、焊接时，戴好口罩，以防有害气体，灰尘的吸入。

　　4. When welding, wear a mask to prevent the inhalation of harmful gases and dust.

　　1、电焊专用的防护工作服、手套和皮鞋。

　　1. Protective work clothes, gloves, and leather shoes specifically designed for welding.

　　2、焊工作业时必须穿绝缘鞋、戴专用绝缘手套。

　　2. Welders must wear insulated shoes and specialized insulated gloves during their work.

　　3、焊接时，焊工及周围其他人员应配戴防尘毒口罩，减少烟尘吸入体内。

　　3. During welding, welders and other personnel around should wear dust masks to reduce the inhalation of smoke and dust into their bodies.

　　4、焊接时焊工及周围作业人员应穿戴好劳保用品。禁止不戴电焊面罩、不戴有色睛镜直接观察电弧光;尽可能减少皮肤外露，夏天禁止穿短裤和短褂从事电焊作业;有条件的可对外露的皮肤涂抹紫外线防护膏。

　　4. Welders and surrounding workers should wear personal protective equipment during welding. It is prohibited to observe the arc light directly without wearing a welding mask or colored goggles; Minimize skin exposure as much as possible, and prohibit wearing shorts and short coats for welding operations in summer; If conditions permit, apply UV protective cream to exposed skin.

　　扩展阅读：

　　Extended reading:

　　电焊服具耐磨﹑隔热和防火性能;

　　Wear resistance, thermal insulation, and fire resistance of welding equipment;

　　受力部位均采用双层皮及锅钉加固结构，提供高度作业环境;

　　The key load-bearing areas are reinforced with double-layer leather and pot nails, providing a highly safe working environment;

　　配有可调魔术贴的可翻式直立衣领，可阻挡烧焊飞溅物;

　　Equipped with adjustable Velcro, the reversible upright collar can block welding spatter;

　　肩部置有护缝条，加强耐用度。

　　There are seam protectors placed on the shoulders to enhance durability.

　　防火阻燃的棉质衣领、舒适又吸汗。手袖上部和肩位有内里，方便穿卸。

　　Fireproof and flame-retardant cotton collar is safe, comfortable, and sweat absorbent. The upper part of the sleeves and shoulders have lining for easy on and off.

　　电焊服前胸防护皮条设计可防止烧焊飞溅物溅入衣内，双层皮及锅钉加固结构，防止撕脱。

　　The design of the front chest protective leather strip of the welding suit can prevent welding spatter from splashing into the clothes, and the double-layer leather and pot nail reinforcement structure can prevent tearing off.

　　【健康性】通过Oeko-Tex standard 100严格检测，保证焊工的使用。

　　【 Health and Safety 】 Through strict testing according to Oeko Tex standard 100, the safety of welders is ensured.

　　【劳作性】面料强度高、耐撕破、耐拉伸、耐摩擦。

　　【 Labor Safety 】 The fabric has high strength, tear resistance, stretch resistance, and friction resistance.

　　【舒适性】精选符合Oeko-Tex Standard的染料，确保服装中不含对人体有害的物质。

　　【 Comfort 】 Selected dyes that meet Oeko Tex standards ensure that clothing does not contain harmful substances to the human body.

　　【适体性】服装具有适应穿着者动作和生活的性能。符合人体工程学的设计。

　　Clothing has the ability to adapt to the movements and daily life of the wearer. Ergonomic design.

　　【阻燃性/拒油拒水】适用于偶尔接触到火花、高温金属残渣等场所环境中所穿，耐久性阻燃。

　　【 Flame retardant/oil and water repellent 】 Suitable for wearing in environments with occasional contact with sparks, high-temperature metal residues, etc., durable flame retardant.

　　【洗涤特点】可耐洗50次，不可漂白，可机洗、可工业洗涤。

　　[Washing characteristics] It can withstand 50 washes, cannot bleach, can be machine washed, and can be industrial washed.

　　【警示语】不适用于消防救援

　　[Warning] Not applicable to firefighting and rescue operations