很多行政采购工服，第一句话就是“一套多少钱”。但低价工装非常常翻车的不是贵，而是穿三个月领口塌、袖口开线、洗两次就掉色——员工嫌丑不愿穿，车间主任只能天天催补单。

Many administrative procurement uniforms have the first sentence of 'how much does one set cost'. But the most common reason for the failure of low-priced workwear is not its high price, but rather the collapse of the collar after wearing it for three months, the opening of the cuffs, and the color fading after washing it twice - employees find it ugly and unwilling to wear it, and the workshop director can only urge for replacement orders every day.

选工服先按岗位拆，别用一套版型通吃：

When choosing work clothes, first disassemble them according to the position, don't use a set of uniform designs:

车间机加工、汽修：用65涤35棉斜纹或加厚帆布，克重240g/㎡以上，耐磨耐油污，弯腰抬手处多留12cm活动量。

Workshop machining and auto repair: Use 65 polyester 35 cotton twill or thickened canvas, with a weight of 240g/㎡ or more, wear-resistant and oil resistant, and leave an extra 12cm of movement at the bend and lift.

电子厂、配电室：建议上网格导电丝防静电面料，表面电阻10⁶–10¹¹Ω，过GB 12014，别拿普通涤棉冒充。

Electronic factories and distribution rooms must use grid conductive wire anti-static fabric with a surface resistance of 10 ⁶ -10 ¹¹ Ω, in compliance with GB 12014. Do not use ordinary polyester cotton as a substitute.

户外市政、物流：基底用涤棉帆布，前后加50mm宽反光条，暗光作业才不会被车蹭到。

Outdoor municipal and logistics: The base is made of polyester cotton canvas, with 50mm wide reflective strips added at the front and back to prevent vehicles from rubbing against it during low light operations.

前台、门店、银行：POLO或轻薄夹克，精梳棉混纺挺括抗皱，刺绣logo比胶印耐洗十倍。

Front desk, store, bank: POLO or lightweight jacket, combed cotton blend crisp and wrinkle resistant, embroidered logo is ten times more washable than offset printing.

下单前盯死四条，比砍价有用：

Pay attention to four items before placing an order, which is more useful than bargaining:

合同写清“成分+纱支+克重+色牢度≥4级”，留一块面料小样封样验收。

The contract clearly states that "composition+yarn count+grammage+color fastness ≥ level 4", and leaves a sample of the fabric for sealing and acceptance.

大货前打一件样衣，让员工抬手、弯腰、蹲起试一遍，肩宽袖长不对当场改。

Before bulk production, make a sample garment and ask employees to lift their hands, bend down, and squat to test it. If the shoulder width and sleeve length are not correct, they should be changed on the spot.

特殊体型单独量体，别全公司只报S/M/L/XL，不然胖瘦两个出彩端一定有人穿不了。

Special body types should be measured separately, and the entire company should not only report S/M/L/XL, otherwise there will definitely be people who cannot wear the two extremes of weight and thinness.

问清换货率和补单周期，员工流动要加人，同批面料色差才不会翻车。

Inquire about the exchange rate and replenishment cycle, increase employee turnover, and ensure that there are no color differences in the same batch of fabrics to prevent turnover.

济南本地有自有车间和样衣库的厂家，上午量体下午出图，急单也能按原版复尺，不用每次重新核版。

There are local manufacturers in Jinan who have their own workshops and sample clothing warehouses. They measure in the morning and produce drawings in the afternoon, and urgent orders can also be re measured according to the original version without having to recheck each time.

本文由济南工作服友情奉献.更多有关的知识请点击:http://www.ymsfs.com我们将会对您提出的疑问进行详细的解答，欢迎你登录网站留言.

This article is a friendly contribution from Jinan workwear For more information, please click: http://www.ymsfs.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message